http://www.mudnworks.com/~american American Made Off Road Parts and Accessories for your American Made Jeep Vehicle. en http://www.mudnworks.com/~american/product.php?productid=16629 2011-05-30T22:30:34 * Jeep CJ-5 (1976-1983); Right (Passenger Side). * Jeep CJ-7 or CJ-8 (1976-1981); Right (Passenger Side). * Kit Includes: Axle Shaft (29-1/4" long), Hub, Bearing, Seals, Nut, Washers, Key, and Instruction Sheet. http://www.mudnworks.com/~american/image.php?id=16629 http://www.mudnworks.com/~american/product.php?productid=16629 http://www.mudnworks.com/~american/product.php?productid=16630 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1993-2002) w/ Dana 35 and Rear Drum Brakes. * Jeep Cherokee (1992-2001) w/ Dana 35 and Rear Drum Brakes. * Jeep Comanche (1992-1993) w/ Dana 35 and Rear Drum Brakes. * Jeep Grand Cherokee (1993-1996) w/ Dana 35 and Rear Drum Brakes. * Sold in pairs and include tone rings, seals, bearings, retainers, and wheel studs. http://www.mudnworks.com/~american/image.php?id=16630 http://www.mudnworks.com/~american/product.php?productid=16630 http://www.mudnworks.com/~american/product.php?productid=16631 2011-05-30T22:30:34 Fits: * All Jeeps (1990 +) w/ Dana 35 Rear Axle (except 1999+ Grand Cherokee). * Kit Includes: Pinion, carrier bearings, crush sleeve, oil seals, cover gasket, axle shaft inner/outer seals and bearings. http://www.mudnworks.com/~american/image.php?id=16631 http://www.mudnworks.com/~american/product.php?productid=16631 http://www.mudnworks.com/~american/product.php?productid=16632 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-1989) w/ Model 35 Rear Axle; Incl. Roll Type Pin. * Jeep Cherokee (1984-1989) w/ Model 35 Rear Axle; Standard; Roll Type Pin. http://www.mudnworks.com/~american/image.php?id=16632 http://www.mudnworks.com/~american/product.php?productid=16632 http://www.mudnworks.com/~american/product.php?productid=16633 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-2006) w/ Model 35 Rear Axle; Trac-Lok. * Jeep Cherokee (1984-2001) w/ Model 35 Rear Axle; Trac-Lok. * Jeep Grand Cherokee (1993-1998) w/ Model 35 Rear Axle; Trac-Lok. * Jeep Grand Cherokee (1999-2001) w/ Model 35 Rear Axle; Trac-Lok; 3.73 Ratio. * Jeep Liberty (2002) w/ Model 35 Rear Axle; Trac-Lok. http://www.mudnworks.com/~american/image.php?id=16633 http://www.mudnworks.com/~american/product.php?productid=16633 http://www.mudnworks.com/~american/product.php?productid=16634 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-1989) with Model 35 Rear Axle. * Jeep Cherokee (1984-1989) w/ Model 35 Rear Axle; Trac-Lok. http://www.mudnworks.com/~american/image.php?id=16634 http://www.mudnworks.com/~american/product.php?productid=16634 http://www.mudnworks.com/~american/product.php?productid=16635 2011-05-30T22:30:34 Differential Gear Set Replaces Part #: 83503002 Fits: * Jeep Wrangler (1987-1993) w/ Model 35 Rear Axle; 3.07 Ratio. * Jeep Wrangler (1993-1994) w/o ABS and w/ Model 35 Rear Axle; 3.07 Ratio; w/ casting #41994, 42148. * Jeep Cherokee (1984-1993) w/ Model 35 Rear Axle; Standard. * Jeep Cherokee (1994) w/ Model 35 Rear Axle; Standard; w/ casting #41994 or 42148. http://www.mudnworks.com/~american/image.php?id=16635 http://www.mudnworks.com/~american/product.php?productid=16635 http://www.mudnworks.com/~american/product.php?productid=16636 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-1995) w/ Model 35 Rear Axle; Ratios: 3.55, 4.11, 4.56. * Jeep Wrangler (1997-10/1/2000) w/ Model 35 Rear Axle; Trac-Lok; Ratios: 3.55, 3.73, 4.11; Incl. gear set. * Jeep Cherokee (1984-10/1/2000) w/ Model 35 Rear Axle; Trac-Lok; Ratios: 3.55, 3.73, 4.11, 4.56; Incl. gear set. * Jeep Grand Cherokee (1993-1998) w/ Model 35 Rear Axle; Trac-Lok; Incl. gear set. http://www.mudnworks.com/~american/image.php?id=16636 http://www.mudnworks.com/~american/product.php?productid=16636 http://www.mudnworks.com/~american/product.php?productid=16641 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-2006) with Model 35 Rear Axle. * Jeep Cherokee (1984-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-1998) with Model 35 Rear Axle. * Jeep Liberty (2002) with Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16641 http://www.mudnworks.com/~american/product.php?productid=16641 http://www.mudnworks.com/~american/product.php?productid=16637 2011-05-30T22:30:34 Multiple Applications: Thermostats: * Jeep Grand Cherokee (1999-2004) w/ 4.7L engine. * Jeep Liberty (2002-2005) Valve Covers: * All Jeeps (1987-1995) w/ 4.0L engine. * All Jeeps (1981-1986) w/ 4.2L engine. * All Jeeps (1981-1991) w/ 5.9L engine. http://www.mudnworks.com/~american/image.php?id=16637 http://www.mudnworks.com/~american/product.php?productid=16637 http://www.mudnworks.com/~american/product.php?productid=16638 2011-05-30T22:30:34 Differential Cover Gasket Replaces Part #: 35AX-CG Price: $2.30 In Stock: 491 Available Quantity: Quantity in Cart: none Fits: * Jeep Wrangler (1987-2005) with Model 35 Rear Axle. * Jeep Cherokee (1984-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-2004) with Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16638 http://www.mudnworks.com/~american/product.php?productid=16638 http://www.mudnworks.com/~american/product.php?productid=16639 2011-05-30T22:30:34 This is the open carrier that holds the ring gear inside the axle housing for the Dana 35 axle. There are several different options depending on the year, gear ratio and other factors that can determine the proper model for your vehicle. Below is a listing of all combinations for your vehicle - Specific combinations include the differential gear set, shims and bearings as noted. Part # 83502880 Fits: * Jeep Wrangler (1987-1995) w/ Model 35 Rear Axle andamp; w/o ABS; Includes gear set; 3.07 Ra... http://www.mudnworks.com/~american/image.php?id=16639 http://www.mudnworks.com/~american/product.php?productid=16639 http://www.mudnworks.com/~american/product.php?productid=16640 2011-05-30T22:30:34 3 Available Quantity: Quantity in Cart: None Fits: * Jeep Wrangler (1987-1989) w/ Model 35 Rear Axle; Incl. Roll Type Pin. * Jeep Cherokee (1984-1989) w/ Model 35 Rear Axle; Standard; Roll Type Pin. http://www.mudnworks.com/~american/image.php?id=16640 http://www.mudnworks.com/~american/product.php?productid=16640 http://www.mudnworks.com/~american/product.php?productid=16642 2011-05-30T22:30:34 Fits Front Axle: * Jeep CJ (1976-1986) with Model 30 Front Axle. * Jeep Wrangler (1987-2006) with Model 30 Front Axle. * Jeep Cherokee (1984-2001) with Model 30 Front Axle. * Jeep Grand Cherokee (1993-2004) with Model 30 Front Axle. * Jeep Liberty (2002-2007) with Model 30 Front Axle. Fits Rear Axle: * Jeep Wrangler (1987-2006) with Model 35 Rear Axle. * Jeep Cherokee (1984-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-2004) with Model 35 Rear Axle. * Jeep Liberty (2002) with Mod... http://www.mudnworks.com/~american/image.php?id=16642 http://www.mudnworks.com/~american/product.php?productid=16642 http://www.mudnworks.com/~american/product.php?productid=16643 2011-05-30T22:30:34 This is the open carrier that holds the ring gear inside the axle housing for the Dana 35 axle. There are several different options depending on the year, gear ratio and other factors that can determine the proper model for your vehicle. Below is a listing of all combinations for your vehicle - Specific combinations include the differential gear set, shims and bearings as noted.andnbsp; Part #: 4740834 Fits: * Jeep Wrangler (1991-1995) w/ ABS andamp; Model 35 Rear Axle; Ratios: 3.55, 4.11, 4.... http://www.mudnworks.com/~american/image.php?id=16643 http://www.mudnworks.com/~american/product.php?productid=16643 http://www.mudnworks.com/~american/product.php?productid=16644 2011-05-30T22:30:34 This is the open carrier that holds the ring gear inside the axle housing for the Dana 35 axle. There are several different options depending on the year, gear ratio and other factors that can determine the proper model for your vehicle. Below is a listing of all combinations for your vehicle . Part #: 53000561 Fits: * Jeep Wrangler (1987-1989) w/ Model 35 Rear Axle; Ratios: 3.07, 3.55, 4.11; w/ .66" Bolt Length. * Jeep Cherokee (1984-1989) w/ Model 35 Rear Axle; Ratios: 3.07, 3.55, 4.11; w/ ... http://www.mudnworks.com/~american/image.php?id=16644 http://www.mudnworks.com/~american/product.php?productid=16644 http://www.mudnworks.com/~american/product.php?productid=16645 2011-05-30T22:30:34 Part #: 83505472 Fits: * Jeep Wrangler (1987-1995) w/ Model 35 Rear Axle; 3.07 Ratio (43-14); OE Bolt length .81". * Jeep Wrangler (1997-10/1/2000) w/ Model 35 Rear Axle; 3.07 Ratio; (42827 / 42828). * Jeep Cherokee (1987-10/1/2000) w/ Model 35 Rear Axle; 3.07 Ratio (43-14); OE Bolt Length .81". Part #: 5073013AA Fits: * Jeep Wrangler (10/2/2000-2006) w/ Model 35 Rear Axle; 3.07 Ratio. * Jeep Cherokee (10/2/2000-2001) w/ Model 35 Rear Axle; 3.07 Ratio. http://www.mudnworks.com/~american/image.php?id=16645 http://www.mudnworks.com/~american/product.php?productid=16645 http://www.mudnworks.com/~american/product.php?productid=16646 2011-05-30T22:30:34 Part #: 83505472 Fits: * Jeep Wrangler (1987-1995) w/ Model 35 Rear Axle; 3.07 Ratio (43-14); OE Bolt length .81". * Jeep Wrangler (1997-10/1/2000) w/ Model 35 Rear Axle; 3.07 Ratio; (42827 / 42828). * Jeep Cherokee (1987-10/1/2000) w/ Model 35 Rear Axle; 3.07 Ratio (43-14); OE Bolt Length .81". Part #: 5073013AA Fits: * Jeep Wrangler (10/2/2000-2006) w/ Model 35 Rear Axle; 3.07 Ratio. * Jeep Cherokee (10/2/2000-2001) w/ Model 35 Rear Axle; 3.07 Ratio. http://www.mudnworks.com/~american/image.php?id=16646 http://www.mudnworks.com/~american/product.php?productid=16646 http://www.mudnworks.com/~american/product.php?productid=16647 2011-05-30T22:30:34 OEM Ring andamp; Pinion sets for your vehicle from Crown Automotive. Price: $195.00 Part #: 5086639AA Fits: * Jeep Wrangler (2002-2006) w/ Model 35 Rear Axle; 3.73 Ratio. Price: $250.00 Part #: 4761678 Fits: * Jeep Wrangler (1994-2001) w/ Model 35 Rear Axle; 3.73 Ratio (41-11) (46135/46136). * Jeep Cherokee (1994-10/1/2000) w/ Model 35 Rear Axle; 3.73 Ratio (41-11). * Jeep Grand Cherokee (1993-1998) w/ Model 35 Rear Axle; 3.73 Ratio (46135/46136). http://www.mudnworks.com/~american/image.php?id=16647 http://www.mudnworks.com/~american/product.php?productid=16647 http://www.mudnworks.com/~american/product.php?productid=16652 2011-05-30T22:30:34 Rear Axle Assy (Right) Fits: * Jeep Wrangler (1987-1989) w/ Model 35 Rear Axle; Right Side; 28.85". * Jeep Cherokee (1984-1989) w/o ABS andamp; w/ Model 35 Rear Axle; Right Side; 28.85". http://www.mudnworks.com/~american/image.php?id=16652 http://www.mudnworks.com/~american/product.php?productid=16652 http://www.mudnworks.com/~american/product.php?productid=16648 2011-05-30T22:30:34 OEM Ring andamp; Pinion sets for your vehicle from Crown Automotive. Part #: 83504938 Fits: * Jeep Wrangler (1987-1995) w/ Model 35 Rear Axle; 4.11 Ratio (37-9). * Jeep Wrangler (1997-10/1/2000) w/ Model 35 Rear Axle; 4.11 Ratio; (42119/42722). * Jeep Cherokee (1986-1996) w/ Model 35 Rear Axle; 4.11 Ratio (37-9). Part #: 5073266AA Fits: * Jeep Wrangler (10/2/2000-2006) w/ Model 35 Rear Axle; 4.11 Ratio. http://www.mudnworks.com/~american/image.php?id=16648 http://www.mudnworks.com/~american/product.php?productid=16648 http://www.mudnworks.com/~american/product.php?productid=16649 2011-05-30T22:30:34 Part #: 83505472 Fits: * Jeep Wrangler (1987-1995) w/ Model 35 Rear Axle; 3.07 Ratio (43-14); OE Bolt length .81". * Jeep Wrangler (1997-10/1/2000) w/ Model 35 Rear Axle; 3.07 Ratio; (42827 / 42828). * Jeep Cherokee (1987-10/1/2000) w/ Model 35 Rear Axle; 3.07 Ratio (43-14); OE Bolt Length .81". Part #: 5073013AA Fits: * Jeep Wrangler (10/2/2000-2006) w/ Model 35 Rear Axle; 3.07 Ratio. * Jeep Cherokee (10/2/2000-2001) w/ Model 35 Rear Axle; 3.07 Ratio. http://www.mudnworks.com/~american/image.php?id=16649 http://www.mudnworks.com/~american/product.php?productid=16649 http://www.mudnworks.com/~american/product.php?productid=16650 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-2006) with Model 35 Rear Axle. * Jeep Cherokee (1984-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-2004) with Model 35 Rear Axle. * Jeep Liberty (2002) with Model 35 Rear Axle; Incl. Bearing and Cup. http://www.mudnworks.com/~american/image.php?id=16650 http://www.mudnworks.com/~american/product.php?productid=16650 http://www.mudnworks.com/~american/product.php?productid=16651 2011-05-30T22:30:34 Part #: 83503003 Fits: * Jeep Wrangler (1987-2006) with Model 35 Rear Axle. * Jeep Cherokee (1984-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-1998) with Model 35 Rear Axle. * Jeep Liberty (2002) with Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16651 http://www.mudnworks.com/~american/product.php?productid=16651 http://www.mudnworks.com/~american/product.php?productid=16653 2011-05-30T22:30:34 Rear Axle Assy (Left) * Jeep Wrangler (1987-1989) w/ Model 35 Rear Axle; Left Side; 30.35". * Jeep Cherokee (1984-1989) w/o ABS and w/ Model 35 Rear Axle; Left Side; 30.35". http://www.mudnworks.com/~american/image.php?id=16653 http://www.mudnworks.com/~american/product.php?productid=16653 http://www.mudnworks.com/~american/product.php?productid=16654 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-2002) with Model 35 Rear Axle. * Jeep Wrangler (1987-2002) with Model 44 Rear Axle. * Jeep Cherokee (1991-2001) w/ Chrysler 8-1/4" Rear Axle. * Jeep Cherokee (1984-2001) w/ Model 35 Rear Axle. * Jeep Cherokee (1988-1990) w/ Model 44 Rear Axle. * Jeep Comanche (1988-1993) w/ Model 44 Rear Axle. * Jeep Grand Cherokee (1993) w/ Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16654 http://www.mudnworks.com/~american/product.php?productid=16654 http://www.mudnworks.com/~american/product.php?productid=16655 2011-05-30T22:30:34 Axle Shaft Outer Seal Part #: 53000477 Fits: * Jeep Wrangler (1987-1989) with Model 35 Rear Axle. * Jeep Cherokee (1984-1989) with Model 35 Rear Axle. Part #: 4856336 Fits: * Jeep Wrangler (1990-2006) with Model 35 Rear Axle. * Jeep Cherokee (1990-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-1998) with Model 35 Rear Axle. * Jeep Grand Cherokee (1994-1998) with Model 44 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16655 http://www.mudnworks.com/~american/product.php?productid=16655 http://www.mudnworks.com/~american/product.php?productid=16656 2011-05-30T22:30:34 Part #: 53000475 Fits: * Jeep Cherokee (1984-1989) with Model 35 Rear Axle. Replaces Part #: J8134036 Price: $10.50 In Stock: 596 Available Quantity: Quantity in Cart: none Part #: J8134036 Fits: * All Jeeps with T4 or T5 Manual Transmission. * Jeep Wrangler (1987-1995) with Model 35 Rear Axle. * Jeep Cherokee (1990-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-1998) with Model 35 Rear Axle. * Jeep Grand Cherokee (1996-1998) with Model 44 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16656 http://www.mudnworks.com/~american/product.php?productid=16656 http://www.mudnworks.com/~american/product.php?productid=16657 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1990-2006) with Model 35 Rear Axle. * Jeep Cherokee (1990-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-1998) with Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16657 http://www.mudnworks.com/~american/product.php?productid=16657 http://www.mudnworks.com/~american/product.php?productid=16658 2011-05-30T22:30:34 Replaces Part #: 3175779 Fits: * Jeep Wrangler (1987-2005) with Model 35 Rear Axle. * Jeep Cherokee (1984-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-1998) with Model 35 Rear Axle. * Jeep Grand Cherokee (2003-2004) w/ Model 35 Rear Axle and 3.55 Ratio. http://www.mudnworks.com/~american/image.php?id=16658 http://www.mudnworks.com/~american/product.php?productid=16658 http://www.mudnworks.com/~american/product.php?productid=16659 2011-05-30T22:30:34 Fits Front Axle: * Jeep Wrangler (1997-2006) w/ Model 30 Front Axle. * Jeep Cherokee (2000-2001) w/ Model 30 Front Axle; LHD. * Jeep Grand Cherokee (1993-2004) w/ Model 30 Front Axle. Fits Rear Axle: * Jeep Wrangler (1987-2006) with Model 35 Rear Axle. * Jeep Cherokee (1991-2001) w/ Chrysler 8-1/4" Rear Axle. * Jeep Cherokee (1984-2001) w/ Model 35 Rear Axle. * Jeep Grand Cherokee (1993-2004) w/ Model 35 Rear Axle. * Jeep Liberty (2002) w/ Model 35 Rear Axle. * Jeep Liberty (2002-2005) w/ Ch... http://www.mudnworks.com/~american/image.php?id=16659 http://www.mudnworks.com/~american/product.php?productid=16659 http://www.mudnworks.com/~american/product.php?productid=16660 2011-05-30T22:30:34 Pinion Seal Fits: * Jeep Wrangler (1987-2006) with Model 35 Rear Axle. * Jeep Cherokee (1984-2001) with Model 35 Rear Axle. * Jeep Grand Cherokee (1993-1998) with Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16660 http://www.mudnworks.com/~american/product.php?productid=16660 http://www.mudnworks.com/~american/product.php?productid=16661 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-1989) with Model 35 Rear Axle. * Jeep Cherokee (1984-1989) with Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16661 http://www.mudnworks.com/~american/product.php?productid=16661 http://www.mudnworks.com/~american/product.php?productid=16662 2011-05-30T22:30:34 Fits: * Jeep Wrangler (1987-1989) with Model 35 Rear Axle. * Jeep Cherokee (1984-1989) with Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16662 http://www.mudnworks.com/~american/product.php?productid=16662 http://www.mudnworks.com/~american/product.php?productid=16663 2011-05-30T22:30:34 Part #: 83503318 Fits: * Jeep Wrangler (1987-2001) w/ Model 35 Rear Axle; 2.98" Overall Height. * Jeep Cherokee (1984-2/15/1995) w/ Model 35 Rear Axle; 2.98" Overall Height. * Jeep Grand Cherokee (1993-1996) w/ Model 35 Rear Axle; 2.98" Overall Height. * Commonly called 1310 Series U Joint Yoke Part #: 4746835 Fits: * Jeep Wrangler (1993-1995) w/ Model 35 Rear Axle; 3.59" Overall Height. * Jeep Cherokee (1996-2001) w/ Model 35 Rear Axle; Ratios: 3.07, 3.73; 3.59" Overall Height. * Commonly c... http://www.mudnworks.com/~american/image.php?id=16663 http://www.mudnworks.com/~american/product.php?productid=16663 http://www.mudnworks.com/~american/product.php?productid=16664 2011-05-30T22:30:34 Fits: * Jeep CJ (1976-1986) with Model 20 Rear Axle. * Jeep SJ and J-Series (1976-1986) with Model 20 Rear Axle. * Jeep Wrangler (1987-1995) with Model 35 Rear Axle. * Jeep Cherokee (1984-2001) with Model 35 Rear Axle. http://www.mudnworks.com/~american/image.php?id=16664 http://www.mudnworks.com/~american/product.php?productid=16664 http://www.mudnworks.com/~american/product.php?productid=16665 2011-05-30T22:30:34 Fits: * All Jeeps w/ Dana 35 Rear Axle (except 99-04 Grand Cherokee). * Kit Includes: All Pinion Shaft Bearings, Pinion Seal, Cover Gasket, and Shims. http://www.mudnworks.com/~american/image.php?id=16665 http://www.mudnworks.com/~american/product.php?productid=16665 http://www.mudnworks.com/~american/product.php?productid=16666 2011-05-30T22:30:34 U-Joint Strap andamp; Bolt Kit (Hex Head) Part #: 4006698K Fits: andnbsp;andnbsp;andnbsp; * All Jeeps (1972-2004); For Front or Rear U-Joints (Hex head bolt). Universal Joint Strap Kit Part #: 4006928K Fits: andnbsp;andnbsp;andnbsp; * All Jeeps (1972-2004); For Front or Rear U-Joints (12 Point "Torx" bolt). http://www.mudnworks.com/~american/image.php?id=16666 http://www.mudnworks.com/~american/product.php?productid=16666 http://www.mudnworks.com/~american/product.php?productid=16667 2011-05-30T22:30:34 Rear Axle Assy (Right) Fits: * Jeep Wrangler (1990) w/o ABS and w/ Model 35 Rear Axle; Right; 29.04". * Jeep Cherokee (1990-1991) w/o ABS and w/ Model 35 Rear Axle; Right; 29.04". http://www.mudnworks.com/~american/image.php?id=16667 http://www.mudnworks.com/~american/product.php?productid=16667 http://www.mudnworks.com/~american/product.php?productid=16668 2011-05-30T22:30:34 Rear Axle Assy (Left) * Jeep Wrangler (1990) w/o ABS and w/ Model 35 Rear Axle; Left; 29.04". * Jeep Cherokee (1990-1991) w/o ABS and w/ Model 35 Rear Axle; Left; 29.04". http://www.mudnworks.com/~american/image.php?id=16668 http://www.mudnworks.com/~american/product.php?productid=16668 http://www.mudnworks.com/~american/product.php?productid=16133 2011-05-30T22:30:34 Here is the most used tire carrier hinge kit on the market. These units are rated at 1,000 lbs.! The spindles fit into a 1.25" hole in your bumper and include all bearings, races, seals, and hardware needed for installation. Once you weld the spindle into your bumper and weld the 2.25" OD hinge tube onto your tire carrier you have a well sealed and very strong assembly. http://www.mudnworks.com/~american/image.php?id=16133 http://www.mudnworks.com/~american/product.php?productid=16133 http://www.mudnworks.com/~american/product.php?productid=16137 2011-05-30T22:30:34 Daystar Dash Panel for Jeep JK Wrangler http://www.mudnworks.com/~american/image.php?id=16137 http://www.mudnworks.com/~american/product.php?productid=16137 http://www.mudnworks.com/~american/product.php?productid=16138 2011-05-30T22:30:34 Jeep JK Wrangler Tow Hitch Receiver http://www.mudnworks.com/~american/image.php?id=16138 http://www.mudnworks.com/~american/product.php?productid=16138 http://www.mudnworks.com/~american/product.php?productid=16628 2011-05-30T22:30:34 * Jeep CJ-5 (1976-1983); Left (Driver Side). * Jeep CJ-7 or CJ-8 (1976-1981); Left (Driver Side). * Kit Includes: Axle Shaft (26-1/4" long), Hub, Bearing, Seals, Nut, Washers, Key, and Instruction Sheet. http://www.mudnworks.com/~american/image.php?id=16628 http://www.mudnworks.com/~american/product.php?productid=16628 http://www.mudnworks.com/~american/product.php?productid=16139 2011-05-30T22:30:34 Rough Country 4" Suspension Lift Kit for your 2007 or newer Jeep JK Wrangler 2 door or JK Wrangler Unlimited 4 door. http://www.mudnworks.com/~american/image.php?id=16139 http://www.mudnworks.com/~american/product.php?productid=16139 http://www.mudnworks.com/~american/product.php?productid=16140 2011-05-30T22:30:34 Bestop Header Bikini Top for 2007 and newer Jeep JK Wrangler. http://www.mudnworks.com/~american/image.php?id=16140 http://www.mudnworks.com/~american/product.php?productid=16140 http://www.mudnworks.com/~american/product.php?productid=16141 2011-05-30T22:30:34 Bestop Header Windshield Channel for Jeep JK Wrangler. http://www.mudnworks.com/~american/image.php?id=16141 http://www.mudnworks.com/~american/product.php?productid=16141 http://www.mudnworks.com/~american/product.php?productid=16142 2011-05-30T22:30:34 Delta Quad Bar Xenon Headlights for JK Wrangler. http://www.mudnworks.com/~american/image.php?id=16142 http://www.mudnworks.com/~american/product.php?productid=16142 http://www.mudnworks.com/~american/product.php?productid=16143 2011-05-30T22:30:34 Delta Quad Bar Xenon Headlights for TJ Wrangler http://www.mudnworks.com/~american/image.php?id=16143 http://www.mudnworks.com/~american/product.php?productid=16143 http://www.mudnworks.com/~american/product.php?productid=16144 2011-05-30T22:30:34 Rocker Guards...Rock Sliders...whatever you call them the bottom line is that you need them on your Jeep. Whether you run the Hammers in California, Harlan, Kentucky, or Rausch Creek in Pennsylvania, or just take your Jeep to the mall, the side panels of your Jeep are very vulnerable. Protect them with the ultimate solution---AtoZ Fabrication Rocker Guards! http://www.mudnworks.com/~american/image.php?id=16144 http://www.mudnworks.com/~american/product.php?productid=16144 http://www.mudnworks.com/~american/product.php?productid=16145 2011-05-30T22:30:34 Rocker Guards...Rock Sliders...whatever you call them the bottom line is that you need them on your Jeep. Whether you run the Hammers in California, Harlan, Kentucky, or Rausch Creek in Pennsylvania, or just take your Jeep to the mall, the side panels of your Jeep are very vulnerable. Protect them with the ultimate solution---AtoZ Fabrication Rocker Guards! http://www.mudnworks.com/~american/image.php?id=16145 http://www.mudnworks.com/~american/product.php?productid=16145 http://www.mudnworks.com/~american/product.php?productid=16146 2011-05-30T22:30:34 The new Wrangler JK and its longer sibling the Wrangler Unlimited are now on the trails and AtoZ Fabrication is there with its fine line of Rocker Protection. The KAJE Rocker Guard is not only an item for rocker protection, but it acts as a convenient step also. With minimal drilling into the body pinch weld, and then they tie into the body mount bolts, you wont find a stronger rocker guard out there. Available in both two and four door configurations. Comes complete with stainless hardware a... http://www.mudnworks.com/~american/image.php?id=16146 http://www.mudnworks.com/~american/product.php?productid=16146 http://www.mudnworks.com/~american/product.php?productid=16147 2011-05-30T22:30:34 Rocker Guards...Rock Sliders...whatever you call them the bottom line is that you need them on your Jeep. Whether you run the Hammers in California, Harlan, Kentucky, or Rausch Creek in Pennsylvania, or just take your Jeep to the mall, the side panels of your Jeep are very vulnerable. Protect them with the ultimate solution---AtoZ Fabrication Rocker Guards! http://www.mudnworks.com/~american/image.php?id=16147 http://www.mudnworks.com/~american/product.php?productid=16147 http://www.mudnworks.com/~american/product.php?productid=16148 2011-05-30T22:30:34 Made from 2x4" structural steel and the option of 54" or our 44" wide "Stubby" model. Both have fully welded and machined smooth end caps with built in winch mounting plate for YJs or TJs not using the factory sway bar (optional Fairlead Mount Required). Also includes over built clevis mounts and fog light tabs. Reuses factory hardware. Optional powder coating in a rich smooth black gloss. These bumpers are manufactured right here in the U.S.A. To compliment our line of Jeep bumpers check out... http://www.mudnworks.com/~american/image.php?id=16148 http://www.mudnworks.com/~american/product.php?productid=16148 http://www.mudnworks.com/~american/product.php?productid=16149 2011-05-30T22:30:34 A to Z Fabricationï¾™ is proud to offer their heavy duty winch mounting plate for all Wrangler YJ and TJ models. This mounting plate uses the standard Warnï¾® winch fairlead pattern and fits all Ramseyï¾®, Warnï¾®, Superwinchï¾®, and Milemarkerï¾® winch models rated up to 9k lbs. with the standard 10"x4.5" bottom mounting design. Even fits the Warnï¾® comp. series winches with minor drilling! Works with stock or after market sway bars on all Wranglers. Will not fit Warnï¾® 8274 model winches,... http://www.mudnworks.com/~american/image.php?id=16149 http://www.mudnworks.com/~american/product.php?productid=16149 http://www.mudnworks.com/~american/product.php?productid=16150 2011-05-30T22:30:34 Dont risk damaging your expensive synthetic winch line wish the use of a regular steel hawse or roller fairlead. Get this hard anodized black aluminum synthetic rope fairlead with the AtoZ Fabricationï¾™ logo for the ultimate protection for your expensive synthetic winch line. This fairlead uses the common 10" Warnï¾® fair lead bolt pattern which is centered on the rope opening. http://www.mudnworks.com/~american/image.php?id=16150 http://www.mudnworks.com/~american/product.php?productid=16150 http://www.mudnworks.com/~american/product.php?productid=16151 2011-05-30T22:30:34 A to Z Fabrication™ has created a new device to allow lighting to be applied to the center of your vehicle. The A to Z Fabrication™ Jocky Mount is sandwiched between your fair lead and the winch mount to give you space for two lights up to 7" in diameter. Comes in a rich black powder coat and compliments any color scheme. Can be used with Warn® or Ramsey® pattern fair leads. http://www.mudnworks.com/~american/image.php?id=16151 http://www.mudnworks.com/~american/product.php?productid=16151 http://www.mudnworks.com/~american/product.php?productid=16152 2011-05-30T22:30:34 Made from 2x5x3/16" Structural steel with fully welded and machined smooth end caps, over built clevis mounts that are welded on the front and rear, and a mounting system that makes this the toughest bumper you will find. AtoZ bumper mounts with included studs, grade 8 hardware, and allows the tightest fitment of any bumper on the market. It even comes with a true receiver tube with tow chain hooks, unlike inferior bumpers who just use square stock to make their trailer receiver mount. Bumper... http://www.mudnworks.com/~american/image.php?id=16152 http://www.mudnworks.com/~american/product.php?productid=16152 http://www.mudnworks.com/~american/product.php?productid=16153 2011-05-30T22:30:34 We all know that CJs came with a 5 on 5.5 bolt pattern and that YJs, KJs, XJs, ZJs and TJs came with a 5 on 4.5 pattern. Well, just to screw up the mix the new 2007 Wrangler JK comes with a 5 on 5 pattern. Suppose you upgraded your stock axles on your TJ to the larger 5 on 5.5 pattern, but your tire carrier only holds the stock smaller pattern, and you havent ordered your AtoZ Spare Tire Carrier yet...you need some way to mount your larger pattern 5 on 5.5 wheels to your tail gate. We have th... http://www.mudnworks.com/~american/image.php?id=16153 http://www.mudnworks.com/~american/product.php?productid=16153 http://www.mudnworks.com/~american/product.php?productid=16154 2011-05-30T22:30:34 When using an AtoZ Fabrication front bumper and you wish to use the integrated winch plate (TJ Applications require an Anti-Rock style after market sway bar) youll need this to mount your fairlead. Slips in easily between the winch and the bumper using the winch hardware. Designed around the Warn Fairlead bolt pattern. http://www.mudnworks.com/~american/image.php?id=16154 http://www.mudnworks.com/~american/product.php?productid=16154 http://www.mudnworks.com/~american/product.php?productid=16155 2011-05-30T22:30:34 Bestop Replace-A-Top for Jeep TJ Wrangler 03-06 http://www.mudnworks.com/~american/image.php?id=16155 http://www.mudnworks.com/~american/product.php?productid=16155 http://www.mudnworks.com/~american/product.php?productid=16156 2011-05-30T22:30:34 Bestop Replace-A-Top for Jeep TJ Wrangler 97-02 http://www.mudnworks.com/~american/image.php?id=16156 http://www.mudnworks.com/~american/product.php?productid=16156 http://www.mudnworks.com/~american/product.php?productid=16157 2011-05-30T22:30:34 * Tabor 9K Value Series Winch * Rated Line Pull: = 9000 lbs. * Motor: = 12V * Horse Power: = Not Rated * Remote Control: = Remote switch, 12 ft. lead * Gear Ratio: = Not Published * Size: = 22.7 in. x 6.3 in. x 7.7 in. * Weight: = 84 lbs. * Wire Rope = 100 ft. of 5/16 * Fairlead = Roller http://www.mudnworks.com/~american/image.php?id=16157 http://www.mudnworks.com/~american/product.php?productid=16157 http://www.mudnworks.com/~american/product.php?productid=16159 2011-05-30T22:30:34 Banks Monster Ehaust for Jeep JK Wrangler Unlimited http://www.mudnworks.com/~american/image.php?id=16159 http://www.mudnworks.com/~american/product.php?productid=16159 http://www.mudnworks.com/~american/product.php?productid=16165 2011-05-30T22:30:34 Rugged Ridge Heavy Duty 8500lb Winch http://www.mudnworks.com/~american/image.php?id=16165 http://www.mudnworks.com/~american/product.php?productid=16165 http://www.mudnworks.com/~american/product.php?productid=16166 2011-05-30T22:30:34 KC Hilites Jeep JK Windshield Light Bracket http://www.mudnworks.com/~american/image.php?id=16166 http://www.mudnworks.com/~american/product.php?productid=16166 http://www.mudnworks.com/~american/product.php?productid=16167 2011-05-30T22:30:34 KC Hilites Jeep TJ Windshield Light Bracket http://www.mudnworks.com/~american/image.php?id=16167 http://www.mudnworks.com/~american/product.php?productid=16167 http://www.mudnworks.com/~american/product.php?productid=16168 2011-05-30T22:30:34 KC Hilites Black Long Range SlimLite Kit http://www.mudnworks.com/~american/image.php?id=16168 http://www.mudnworks.com/~american/product.php?productid=16168 http://www.mudnworks.com/~american/product.php?productid=16169 2011-05-30T22:30:34 Rancho Rock Gear Front Bumper for 2007 and newer Jeep JK Wrangler http://www.mudnworks.com/~american/image.php?id=16169 http://www.mudnworks.com/~american/product.php?productid=16169 http://www.mudnworks.com/~american/product.php?productid=16170 2011-05-30T22:30:34 Rancho Rock Gear rear Bumper and Tire Carrier for Jeep JK Wrangler http://www.mudnworks.com/~american/image.php?id=16170 http://www.mudnworks.com/~american/product.php?productid=16170 http://www.mudnworks.com/~american/product.php?productid=16171 2011-05-30T22:30:34 Rancho Rock Gear Tubular Doors for Jeep JK Wrangler http://www.mudnworks.com/~american/image.php?id=16171 http://www.mudnworks.com/~american/product.php?productid=16171 http://www.mudnworks.com/~american/product.php?productid=16172 2011-05-30T22:30:34 Rancho Rock Gear Rear Tubular Doors for JK Wrangler http://www.mudnworks.com/~american/image.php?id=16172 http://www.mudnworks.com/~american/product.php?productid=16172 http://www.mudnworks.com/~american/product.php?productid=16173 2011-05-30T22:30:34 Thule Spare Tire Mount Bike Rack http://www.mudnworks.com/~american/image.php?id=16173 http://www.mudnworks.com/~american/product.php?productid=16173 http://www.mudnworks.com/~american/product.php?productid=16174 2011-05-30T22:30:34 Daystar Hood Wranglers for 2007 and newer Jeep JK Wrangler http://www.mudnworks.com/~american/image.php?id=16174 http://www.mudnworks.com/~american/product.php?productid=16174 http://www.mudnworks.com/~american/product.php?productid=16175 2011-05-30T22:30:34 Daystarandnbsp;Dash Panels create usable storage space on applications where storage for small items is always a challenge. The Upper Dash panels are a great alternative to windshield-mounted accessories (which is becoming illegal in more and more states) and for any small items that need to be stored but remain readily accessible, such as cell phones, sunglasses, etc. Designed using the latest computer modeling software, our Dash Panels have a precise fit and a texture that matches the OE d... http://www.mudnworks.com/~american/image.php?id=16175 http://www.mudnworks.com/~american/product.php?productid=16175 http://www.mudnworks.com/~american/product.php?productid=16176 2011-05-30T22:30:34 Performance Accessories OR-FAB front JK Bumper http://www.mudnworks.com/~american/image.php?id=16176 http://www.mudnworks.com/~american/product.php?productid=16176 http://www.mudnworks.com/~american/product.php?productid=16177 2011-05-30T22:30:34 Hyline Offroad’s uniquely designed Side Step Rocker Panels will give your Jeep a great rugged look, but also hold up to aggressive offroad use. Made from .135 (1/8”+) steel that is CNC laser cut, bent, robotically welded, and then finished with rust inhibitive E-Coating and smooth black powder coated. You truly get the best of everything with this Step Side Rocker Panel. All of our Rocker Panels are designed to give you optimal ground clearance. You also have the ability to add our optional ... http://www.mudnworks.com/~american/image.php?id=16177 http://www.mudnworks.com/~american/product.php?productid=16177 http://www.mudnworks.com/~american/product.php?productid=16178 2011-05-30T22:30:34 Jeep TJ Wrangler Mirror Relocation Brackets with Light Mount http://www.mudnworks.com/~american/image.php?id=16178 http://www.mudnworks.com/~american/product.php?productid=16178 http://www.mudnworks.com/~american/product.php?productid=16179 2011-05-30T22:30:34 AEV Winch Mount Bumper for Jeep JK Wrangler http://www.mudnworks.com/~american/image.php?id=16179 http://www.mudnworks.com/~american/product.php?productid=16179 http://www.mudnworks.com/~american/product.php?productid=16714 2011-05-30T22:30:34 * XD9000i Self-Recovery Winch * Rated Line Pull: = 9000 lbs. * Motor: = 12V * Horse Power: = 4.6 * Remote Control: = Remote switch, 12 ft. lead * Gear Ratio: = 156.1 * Size: = 21.8 in. x 6.3 in. x 9.94 in. * Weight: = 87.1 lbs. * Wire Rope = 125 ft. of 5/16 * Fairlead = Roller http://www.mudnworks.com/~american/image.php?id=16714 http://www.mudnworks.com/~american/product.php?productid=16714 http://www.mudnworks.com/~american/product.php?productid=16181 2011-05-30T22:30:34 Tuffy Security Glove Box for Jeep Jk Wrangler http://www.mudnworks.com/~american/image.php?id=16181 http://www.mudnworks.com/~american/product.php?productid=16181 http://www.mudnworks.com/~american/product.php?productid=16184 2011-05-30T22:30:34 Used stock pitman arm for a Jeep YJ or TJ Wrangler. http://www.mudnworks.com/~american/image.php?id=16184 http://www.mudnworks.com/~american/product.php?productid=16184 http://www.mudnworks.com/~american/product.php?productid=16185 2011-05-30T22:30:34 Used Jeep TJ Wrangler Stock Front Upper Control Arm with Bushing. http://www.mudnworks.com/~american/image.php?id=16185 http://www.mudnworks.com/~american/product.php?productid=16185 http://www.mudnworks.com/~american/product.php?productid=16186 2011-05-30T22:30:34 Used factory rear sway bar link for a 1997 to 2006 Jeep TJ Wrangler. http://www.mudnworks.com/~american/image.php?id=16186 http://www.mudnworks.com/~american/product.php?productid=16186 http://www.mudnworks.com/~american/product.php?productid=16187 2011-05-30T22:30:34 Used factory Jeep TJ Wrangler lower control arm including stock bushings. This control arm will fit 1997 to 2006 Jeep TJ Wrangler. http://www.mudnworks.com/~american/image.php?id=16187 http://www.mudnworks.com/~american/product.php?productid=16187 http://www.mudnworks.com/~american/product.php?productid=16188 2011-05-30T22:30:34 Bestop Upper Door Sliders for TJ Wrangler http://www.mudnworks.com/~american/image.php?id=16188 http://www.mudnworks.com/~american/product.php?productid=16188 http://www.mudnworks.com/~american/product.php?productid=16191 2011-05-30T22:30:34 Front and rear polyurethane coil spacers, bump stop extensions, and (4) RC Hydro 8000 series shocks. andnbsp;andnbsp;andnbsp; ﾕ Clears up to 30" tires. andnbsp;andnbsp;andnbsp; ﾕ 100% bolt-on installation. andnbsp;andnbsp;andnbsp; ﾕ Increased ground clearance. andnbsp;andnbsp;andnbsp; ﾕ Install Time: 1 - 3 hours andnbsp;andnbsp;andnbsp; ﾕ Wheel Backspacing: Factory andnbsp;andnbsp;andnbsp; ﾕ Recommended Tire Size: 30x9.50 http://www.mudnworks.com/~american/image.php?id=16191 http://www.mudnworks.com/~american/product.php?productid=16191 http://www.mudnworks.com/~american/product.php?productid=16192 2011-05-30T22:30:34 Built from Heavy Duty DOM tubing. ﾕ Fits 99-04 Jeep WJ Grand Cherokee Only. ﾕ Works from 3" - 6" of suspension installed. http://www.mudnworks.com/~american/image.php?id=16192 http://www.mudnworks.com/~american/product.php?productid=16192 http://www.mudnworks.com/~american/product.php?productid=16193 2011-05-30T22:30:34 Stainless steel brake lines for 2007 and newer Jeep JK Wrangler 2-door and 4-door Unlimited with 4 to 6 inches of lift. andnbsp; These stainless steel brake lines are a Teflon tube wrapped in Kevlar for strength, then a protective coating, and then the stainless steel. Pressure tested to 4000 psi, and are DOT approved. andnbsp; Includes stainless steel lines, washers, and clips. http://www.mudnworks.com/~american/image.php?id=16193 http://www.mudnworks.com/~american/product.php?productid=16193 http://www.mudnworks.com/~american/product.php?productid=16194 2011-05-30T22:30:34 ﾕ Fits 84-02 Jeep XJ Cherokee Only. ﾕ Requires drop pitman arm. ﾕ Built from Heavy Duty DOM tubing. ﾕ Works from 4" - 6" of suspension installed. http://www.mudnworks.com/~american/image.php?id=16194 http://www.mudnworks.com/~american/product.php?productid=16194 http://www.mudnworks.com/~american/product.php?productid=16197 2011-05-30T22:30:34 These extensions add 2 inches to the rear bumpstops on your 1997 to 2006 Jeep TJ Wrangler. andnbsp; Includes rear bumpstop extensions and hardware. http://www.mudnworks.com/~american/image.php?id=16197 http://www.mudnworks.com/~american/product.php?productid=16197 http://www.mudnworks.com/~american/product.php?productid=29192 2011-05-30T22:30:34 Clayton Off Road package deal lift kits are specifically designed to offer the best all around performance. This kit is put together using only the highest quality parts, and vigorously tested to meet our stringent requirements. Because this is a package deal lift kit, you know that everything is going to properly work together, to give you the best performance possible. Making bulletproof arms is our name to fame and we back that with our lifetime warrantee. But that’s only one step of the... http://www.mudnworks.com/~american/image.php?id=29192 http://www.mudnworks.com/~american/product.php?productid=29192 http://www.mudnworks.com/~american/product.php?productid=16199 2011-05-30T22:30:34 Bar Pin Eliminators eliminate rattle and thumping sound you hear from the rear floorboard or your Jeep Wrangler. This kit allows the bushings to fill the shock loop eye completely, reducing any irritating noises. andnbsp; Includes eliminator brackets, shock sleeves, and hardware. http://www.mudnworks.com/~american/image.php?id=16199 http://www.mudnworks.com/~american/product.php?productid=16199 http://www.mudnworks.com/~american/product.php?productid=16201 2011-05-30T22:30:34 This adjustable front track bar is built from heavy duty DOM tubing and is designed for a 1997 to 2006 Jeep TJ Wrangler with 4 to 6 inches of lift. andnbsp; Includes track bar bracket, adjustable track bar, bushings, and hardware. http://www.mudnworks.com/~american/image.php?id=16201 http://www.mudnworks.com/~american/product.php?productid=16201 http://www.mudnworks.com/~american/product.php?productid=16202 2011-05-30T22:30:34 This adjustable rear track bar is built from heavy duty DOM tubing and is designed to fit aandnbsp;1997 to 2006 Jeep TJ Wrangler with up to 6 inches of lift. andnbsp; Includes adjustable track bar, bushings, and hardware. http://www.mudnworks.com/~american/image.php?id=16202 http://www.mudnworks.com/~american/product.php?productid=16202 http://www.mudnworks.com/~american/product.php?productid=16204 2011-05-30T22:30:34 Passenger side stabilizer unit, passenger side tie rod mount, and hardware. http://www.mudnworks.com/~american/image.php?id=16204 http://www.mudnworks.com/~american/product.php?productid=16204 http://www.mudnworks.com/~american/product.php?productid=16205 2011-05-30T22:30:34 Rear track bar relocation bracket for a 1997 to 2006 Jeep TJ Wrangler with a 2.5 inch suspension lift kit. andnbsp; Includes rear track bar bracket and hardware. http://www.mudnworks.com/~american/image.php?id=16205 http://www.mudnworks.com/~american/product.php?productid=16205 http://www.mudnworks.com/~american/product.php?productid=16206 2011-05-30T22:30:34 A must for anyone using larger than stock tires. Strong, rigid design installs in minutes with simple hand tools.andnbsp; This steering brace fits 1997 to 2006 Jeep TJ Wrangler and 1987 to 1995 Jeep YJ Wrangler. Includes steering brace and hardware. http://www.mudnworks.com/~american/image.php?id=16206 http://www.mudnworks.com/~american/product.php?productid=16206 http://www.mudnworks.com/~american/product.php?productid=16210 2011-05-30T22:30:34 Save yourself time and effort when installing your new suspension with NEW spring bolts or replace those old rusty bolts with Grade 8 hardware. andnbsp; Includes ( 8) Grade 8 bolts, nuts, and washers. http://www.mudnworks.com/~american/image.php?id=16210 http://www.mudnworks.com/~american/product.php?productid=16210 http://www.mudnworks.com/~american/product.php?productid=16211 2011-05-30T22:30:34 This steering stabilizer allows for improved on-road and off-road handling, reduces tie rod and ball joint wear and tear, as well as replaces your boring stock stabilizer. This kit features our High Performance 2.2 series stabilizer cylinders and includes all brackets and hardware. andnbsp; Includes (2) Performance 2.2 series stabilizers, mounting brackets, and hardware. http://www.mudnworks.com/~american/image.php?id=16211 http://www.mudnworks.com/~american/product.php?productid=16211